YMA231 Grinding&Polishing Machine to make kitchen doors
Model No.: YMW231
1.High precision within 0.2mm/m
YMA231 Grinding & Polishing Machine to make kitchen doors
1.YMA231 horizontal Straight Edge Glass Grinding Machine is Improved by model YMA322.
2.It is Special designed for cabinet panel glasses' technological requirement.
3.Technological requirement of CABINET panel glass:glass thickness from 2mm to 5mm.Upper edge need wider than normal and good polish.For mid-edge,because it could not be covered fully by invisible frame,it shall be with higher polish like upper edge.For lower edge,it always invisible only need grinder wheel to avoid cutting fingers.Size error need to be controled within 0.2mm.
4.According to the above requirements,we change the previous configuration to make four wheels for upper edge,three wheels for mid edge,one wheel for lower edge,which can finish upper-edge with high precision and polish,mid-edge fine polish and lower fine grinder.
5.For well controling of glass precision,this machine is adopted Reverse Positioning on straight guide to promise its high precision.
6.It is the best machine for suppliers who produce CABINET panel glasses. Main technical parameters: Measurement:3550*1500*1600mm Total weight:2300kg
Process the glass thickness:2-5mm Angle:45o
Workable dimension:25×25mm Speed:0-4m/min
Input voltage/frequency:~380v/50HZ Power:13.87kw Spindles: total 8 spindles(Upper edge:2 spindles for grinding,2spindles for polishing;mid edge:1 spindle for grinding,2 spindle for polishing;down edge:1 spindle for grinding) SAMPLE SHOW:
sunnysun04031 at hot.com (MSN)
86-539-8310851(fax) Contact us if you need more details on Grinding&polishing Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Polishing Machine to Make Kitchen Doors、Machine to Make Kitchen Doors. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Unsymmetrical Arris Grinding Machine